Instruction manual / EasyGrinder
11
6.3 Grinding cutters
The grinder must be switched off. Hang the pendulum with placed cutter on the
pendulum hook. Move the pendulum hook towards the disc according to the mark
«
Cutter
»
(fig. 7).
Move the cutter several times over the disc with the grinding movement (fig. 8). If the
pendulum hook is too far inside, the cutter will rub on the upper side (fig. 9). If the
Cross section viewed from the
front or tip of a comb tooth
Original sharp edge
worn round with use.
Level after grinding, but
not ground enough to
create a new sharp edge.
When viewed from the
side of the comb this
edge will appear as a
shiny or silver line.
Correct amount of
grinding to create
a sharp edge.
fig. 5
fig. 6
fig. 7
fig. 8
