Heiniger Acutecc Euro Grinder, Руководство пользователя

Страница: 7 / 21

3.6 Discs & Pendulum
The special light weight aluminium alloy discs and pendulum are precision tools and
when used in conjunction with this manual give the best possible edge on your gear.
With care they will provide you with years of service.
To protect the pendulum, always store and transport it in the supplied case, use it only
as instructed in this manual.
It is essential that the discs are not subject to abuse or neglect. Damage may occur that
will render the discs unusable.
Note: The discs may be hazardous if used in a damaged condition.
If discs become damaged they must be replaced.
Use only genuine replacement discs.
The discs are fitted to the grinder when dispatched and are protected by the Euro guard.
This is the best way to protect the discs when transporting.
When not fitted to the grinder the discs should be bolted to the clamp plate and
protected from knocks or being dropped.
Do not drop the discs or lean them against a wall.
Do not subject discs to rapid and extreme changes in temperature.
Do not use levering or striking tools to remove discs from the grinder.
Do not use excessive force to remove the discs from the grinder.
Do not use excessive force or tools to remove emery and glue from the disc.
Do not over tighten the bolt when setting emeries to the discs.
Do not damage the mounting shoulder on the rear of the disc.
Assemble and run the grinder as per this manual when received to ensure you have
received it in good condition. See
5. Accepting delivery & 8.2 Fitting the discs onto the
grinder
7