Step 3:
Line up hole A with hole in part #10, make sure hole B is not
over the hatching of the screen. Bolt part #15 into hole A and
part #10. Use bolt that comes with part #9 slide into hole B and
bolt the black plate of part #9 (on the back side of the screen).
15
9
9
9
10
A
B
Step 4:
Repeat steps 1 through 3 for left hand side of screen assembly.
Make sure to slide two extra pieces of part #10 below part #9.
Step 5:
5
Put screen into middle slot on one of the sides of one part #4.
Step 6:
C
10
C
4
Slide in one part C (that comes with handle) in part #4 (same
as in step 2). Slide in a part #10 to the middle of #4. Attach
part #9 using step 3. Then slide in the other part C after part
#10.
Step 7:
C
8
D
D
Move parts C so that part 8 is centered above part #9. Bolt
part #8 to part #4 using bolts D that comes with #8.
Step 8:
Attach the second part #4 to the top part of screen using step
1.
