Hold the phone in front of the
camera lens (H) and slowly move
it away until the QR code is
accepted (LED indicator (G) goes
from flashing calm green to fast
flashes indicating that the camera is
connecting to your Wi-Fi network).
8.
When the camera is connected to the network,
the LED indicator (G) on the camera will light
solid green, and you will automatically be taken
to the Configure Devices screen. This might
take up to several minutes.
9.
You can now give the camera a name, such
as “Camera hallway” and connect it to a room.
Create a new room if the desired room or area
does not already exist in the overview.
If you have multiple cameras to set up, repeat step 2, 3, and
6 to 9 to add them individually.
If you change the Wi-Fi network or the LED (G) indicates a
fault, reset the camera (see page 12).
