6.
At the top of your screen you recieve a notification for
an unconfigured device. Click
configure
to enter the
found devices
list.
Click
Configure
to add the camera to a specific room
See the configure and usage page for additional
setting options.
7.
5.
Flashes blue
and red
10-30 cm
Present the QR code in front of the camera. The
camera will beep twice and the LED light will flash
blue/red while
connecting to your WIFI network..
Use max brightness on your phone
Configure
and use
Advanced Settings:
The camera can be used for two
purposes; Record and Generic.
Generic:
The camera will not record when it detects motion.
You can manually stream and initiate recordings in
the app.
Note:
The camera will record up to 5 minutes clips.
Record
On motion:
The camera will record while it detects
motion.
On motion when away:
The camera will record when
the alarm is set to away and motion is detected by
the camera.
Note:
The camera will record while it detects motion
(up to 5 minutes clips). If there is still motion after 5
minutes the continuation of the previous recording
will be found in another clip.
