HEIDENHAIN TNC 620 Programming Station, Руководство пользователя

Страница: 342 / 695

Programming Q parameters
9.8 Additional functions
9
342
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
D16
– Formatted output of text and Q parameter
values
With
D16
, you can also output to the screen any
messages from the NC program. Such messages are
displayed by the TNC in a pop-up window.
The function
D16
transfers Q parameter values and texts in a
selectable format. If you send the values, the TNC saves the data
in the file that you defined in the
D16
block. The maximum size of
the output file is 20 kilobytes.
To be able to use the function
D16
, first program a text file that
defines the output format.
Available functions
When you create a text file, use the following formatting functions:
Special
characters Function
"..........." Define output format for texts and variables
between the quotation marks
%9.3F Format for Q parameter:
Define %: format
9.3: 9 total characters (incl. decimal
point), of which 3 are places after the
decimal point
F: Floating (decimal number), format for
Q, QL, QR
%+7.3F Format for Q parameter:
Define %: format
+: number right-aligned
7.3: 7 total characters (incl. decimal point),
of which 3 are places after the decimal
point
F: Floating (decimal number), format for
Q, QL, QR
%S Format for text variable QS
%D or %I Format for integer
, Separation character between output format
and parameter
; End of block character
\n Line break
+ Q parameter value, right-aligned
- Q parameter value, left-aligned