HEIDENHAIN QUADRA-CHEK 2000 Demo, Руководство пользователя

Страница: 50 / 92

Quick Start | Conducting a measurement
5
50
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Measuring the alignment
Define the reference edge for the alignment according to the technical drawing.
Tap
Measure
in the main menu
Select
Manual measuring
in the function palette
If multiple sensors are activated, then select
OED sensor
in
the sensor palette
The geometry palette and the OED measuring tools are now
displayed
The workspace now shows the position display
In the quick access menu, select the magnification that is set
on the measuring machine
Select
Alignment
in the geometry palette
Select
Auto OED
in the tool palette
Cross over the reference edge multiple times with the OED
sensor
A new feature is displayed in the feature list of the Inspector
A new measuring point is added for each pass over the
reference edge
Distribute the measuring points along the entire
length of the edge, as far as possible. This
minimizes the angular error.
Tap
Finish
in the new feature
The alignment is displayed in the feature list of the Inspector
The measurement result preview is now displayed
Figure 14:
Alignment
feature in the feature list with
Measurement result preview