HEIDELBERG e.GO Wallbox home, Руководство по установке

Страница: 16 / 60

bles need an excess length of approx. 1.6 m for
further installation. When fabricating the concrete
foundation, all cables must be protected against
damage by suitable means (e.g. with a protective
hose/conduit). The protective hose/conduit must
have an excess length of approx. 0.3 m above the
concrete foundation. The internal dimension of
the cable hose or conduit must be sufficient to
accommodate additional lines such as those for
equipotential bonding or for an external enable/
disable device.
Above-ground cable routing:
●
All cables must be routed through a cable conduit
or cable duct to the back of the column so that
they are not a tripping hazard. The cables need
an excess length of approx. 1.6 m from the end of
the cable conduit or cable duct for further instal‐
lation. The internal dimension of the cable con‐
duit or cable duct must be sufficient to accom‐
modate additional lines such as those for equipo‐
tential bonding or for an external enable/disable
device.
1.3 Maintenance and cleaning
● Clean the stainless steel column with a stainless
steel cleaner, as necessary.
● Remove any rust film with an abrasive fleece or
similar.
Note
Comply with the instructions for use pro‐
vided by the manufacturer of the clean‐
er.
Always check the compatibility of a
cleaner at an inconspicuous place be‐
fore using it.
Do not clean the column with a water jet
(garden hose, high-pressure cleaner,
etc.).
1.4 Scope of supply/accessories in the separate parts set
● Column,
● adapter plate,
● four M6x16 countersunk screws to fasten the
adapter plate to the column,
● three M8 nuts to fasten the Wallbox to the col‐
umn,
● two cable protecting sleeves,
● installation instructions for the column.
Parts for the earth connection,
●
one contact disk,
Installation instructions
A.1.2