slow speed for about 3 seconds and the volume will after 3 seconds be automatically adjusted at a high
speed.
Mute
. When the mute button on the RC2 remote control is pressed the speaker outputs and PreOut 1 &
2 outputs are muted. A flashing volume number in the display indicates mute is on. To switch mute off
press the mute button on the remote control one more time, press any of the volume buttons on the
RC2 remote control or turn the volume adjustment knob up or down.
Home Theater
. The Home Theater input is a maximum volume line level input with the volume
setting permanently set at volume step 75. The HT input is used when connecting the H100 to a
surround processor with internal adjustable volume.
Do not
connect input sources such as CD-players,
DVD-players or similar signal sources to the Home Theater input. If by mistake a fixed level CD-
player is connected to the Home Theater input severe damage can be done to amplifier and connected
loudspeakers.
If you do not need the Home Theater input, and have a need for an additional adjustable RCA audio
input connector, then your authorized Hegel-dealer can help you in converting the HT input to a
normal audio input with volume adjustment from 0 to 99.
Always connect input / output audio cables and power cable when the amplifier is powered OFF.
After the amplifier is switched on, there is a delay of some seconds before the music signal reaches the
speaker outputs. Never turn off the power knob while music is playing in the speakers. First turn down
the volume or stop the CD-player, then turn off the power knob.
To get the best sound possible we recommend to use the H100 amplifier with a high quality sound
source, a very good choice would be one of the Hegel CD players. The resolution of the Hegel H100 is
so high that the best possible combination will be to use a Hegel CDP2A together with the H100.
Viewed from the rear side the connectors are from left to right:
Home Theater HT input Phono / RCA, right / left
Signal input Phono / RCA, right / left AUX
Signal input Phono / RCA, right / left Tuner
Signal input Phono / RCA, right / left DVD
Signal input Phono / RCA, right / left CD
Balanced signal input XLR right / left
Record output Phono / RCA, right / left
Pre output 1 Phono / RCA, right / left
