9
Radiant footprint
HEATSTRIP
®
electric heaters produce radiant heat which heats objects rather than the air. Therefore, it is imperative that
objects to be heated (ie. people), are within the direct radiant footprint of the heater.
The diagram to the left shows the radiant
footprint of HEATSTRIP
®
Classic, and is an
approximate guide based on a fully enclosed
outdoor environment.
This diagram shows that the maximum heat
output is found directly under the heater, and the
temperature decreases as you move away from
the heater.
It highlights the importance of maintaining
recommended mounting heights, and if possible,
positioning the heater directly above the area to
be heated.
Note that the temperature is the same for the 2
models, regardless of the wattage. However, as
the size increases and the length of the unit
increases, the radiant footprint will be longer.
The below diagrams show the approximate heating area for each model, based on both an indoor and outdoor enclosed
environment, with direct overhead mounting.
The radiant footprint is reduced in angled, wall mounted installations.
Outdoor Layout
Indoor Layout