HEATSTRIP TGH34WN, Руководство по эксплуатации, установке и обслуживанию

Страница: 13 / 14

13
TROUBLE SHOOTING
WARNING
! !
If the appliance still cannot be lit,
contact (03)
9562 3455 for assistance.
WARNING
!
!
Failure to comply with these instructions could
result in a fire or explosion that could cause serious
bodily injury, death or property damage.
Keep heater area clear and free from combustible
materials, gasoline and other flammable vapors and
liquids.
Keep the ventilation openings of the cylinder
enclosure cabinet free and clear of debris.
CLEANING AND MAINTENANCE
Before initial use, and periodically thereafter, we suggest you
wash your heater using a mild soap and warm water solution.
You can use a wash cloth or sponge for this process.
Never use abrasive cleaners, scrubbers or stiff wire brushes
of any type on your heater. These will scratch painted surfaces
during the cleaning process.
Ensure the appliance is dried after cleaning to prevent rusting.
It is recommended the heater be operated on high heat after
cleaning to ensure the appliance is dry.
Try this procedure:
Proper care and maintenance will keep your heater in top operating condition and prolong its life. Follow these
cleaning procedures on a timely basis and your heater will stay clean and operate with minimum effort.
CAUTION: Be sure your heater is OFF and cool before cleaning.
CLEANING EXTERIOR PAINTED SURFACES
Fault Causes Remedy
(a) Air in gas line Purge gas line
(b) Blockage in gas line Trace back and clear
(c) Igniter not sparking Repair lead, electrode, piezo or replace battery
(d) Cylinder turned off Turn on
(e) Cylinder empty Install full cylinder
(a) Poor gas supply Trace supply back to source, clear where necessary
(b) Gas control inoperative Inspect valve, rectify
(c) Insufficient gas Install full cylinder/rectify gas supply
(a) Check injector Clean if necessary
(b) Check gas pressure Adjust as required
(c) Check venturi for dust Clean if necessary
(d) Check burner ports for blockage Clean if necessary
Pilot or main burner will not light
Main burner will not light fully
Flame is yellow