2. To enter Setup menu, press both buttons for 2 sec-
onds
Menu Set
4. Press the ON button 3 times in quick succession.
Only one switch/remote control can be linked at a time.
Solid for 3
seconds
1
1
1
1
1
5. The relay will toggle on and off. Set light will be
solid for 3 seconds, then change to 1 amber blink. This
has confirmed the link with the switch
7. To exit, hold both buttons 2 seconds
solid
8. System will be back to NORMAL operation and
ready to operate
3. Ready to accept new links, the link will stay open for
2 minutes. The Menu light will continue to blink once
as long as the relay is in the Setup menu.
6. Ready to accept new links. Single blink by both
lights. Repeat step 4 for more than 1 switch or remote
control.
1. NORMAL operation, relay needs to be in this posi-
tion.
solid
LINKING RELAY TO SWITCHES & REMOTE CONTROL
