5
•
CAUTION:
Some parts of this heater can become
very hot and cause burns. Particular attention has to
be given where children and vulnerable people are
present.
• The guard of this heater is intended to prevent direct
access to heating elements and must be in place when
the heater is in use
Before Installation
Safe distances required for installation – see figure 1
The heater must only be operated in
a horizontal position with max ±5°
angle left/right.
The heater must be at least 1.8m
above the ground.
The distance of the heater from a
side wall or corner should be a
minimum of 0.50m.
The distance of the heater from
combustible materials must be a
minimum of 0.5m.
The distance of the heater from a
ceiling must be min 0.5 meter.
Electrical
IMPORTANT
The wires in the mains lead are coloured in accordance with the following
code:
Green and Yellow = Earth;
Blue;
= Neutral
Brown;
= Live
WARNING
The mains lead is made from high temperature cable and as such
should not be replaced without consulting a suitable qualified electrician.
The fitting must be earthed.
4
Installation
Figure 1
The
HSQH3000 Heater
is supplied with 1.8m pre-fitted cable and all the
required fixings in the box.
Fixings supplied: 6 x ST4*35 screws; 6 x wall plugs; 4 x M6*14 bolts and
butterfly nuts; Tools needed: Drill, screwdriver and the Allen Key supplied.
According to where
the product installation
location is, use a
power drill to make six
8mm round holes.
•
NOTE:
Install the
unit a minimum
height of 1.8m
above the floor.
Step 1:
see figure 2.
Figure 2
28mm
472mm
500mm
40mm
Figure 3
Figure 4
Figure 5
Insert the six plastic
wall anchors into the
six holes.
Step 2:
see figure 3.
Fix the brackets using
six ST4*35 screws
and make sure the
installation points are
fixed securely.
Step 3:
Fix the brackets to
the heater using four
M6*14 screws and
butterfly nuts.
Step 4:
Please Note,
The
HSQH3000 is also
supplied with a fixing
template for ease of
installation.
