The heater is designed for wall mounting using the wall bracket supplied. It should only be
operated when in the upright position as shown - see
Fig. 1
and
Fig. 2
. All models are splash
proof to IP24 standard and may be used in bathrooms, however not in the immediate vicinity
of baths, showers, water connections, wash basins or swimming pools. Before connecting
the heater check that the supply voltage is the same as that stated on the heater.
IMPORTANT -
The wall bracket supplied with the appliance must be used. The heater should
be positioned observing the minimum clearances stated around the heater - see
Fig. 1
and
Fig. 2
.
DO NOT
locate the heater immediately below a fixed socket outlet or connection box.
1. Remove wall mounting brackets from the protective packaging and locate the wall
mounting template.
2. Using the template, drill and plug the mounting holes specific to your particular model
- see
Fig. 3
.
3. Fix the top wall mounting brackets securely to the wall using the screws provided.
4. The bottom wall mounting brackets should be clipped onto the product prior to
mounting the product to the wall.
5. The product can now be hung on the top wall mounting bracket then fixed in place by
securing the bottom wall bracket(s) in place.
General
Wall Mounting
Dimensions
Model(s)
Watt (kW)
A (mm)
HSDI330
0.33 kW
348
HSDI500
0.50 kW
508
HSDI750
0.75 kW
588
HSDI1000
1.0 kW
668
HSDI1500
1.5 kW
908
HSDI2000
2.0 kW
1068
6
