Issue 01/0419
Operation
This heater can only be used when connected to a
RF
Wireless Controller. Each
RF
controller can control any
number of heaters providing they are in the RF range.
The heater has an indicator light positioned on the
fascia panel. The light may be:
Green
-
when no heat is needed
Red
-
when the heater is on full power
HSCVDURF
HSCVDRF
Wall Mounting
The heater must not be located immediately below a
fixed socket outlet.
The
w
all
m
ounting brackets are packed separately in
the carton. Fit the top mounting brackets to the wall
at the height and centres shown in the diagram.
Withdraw the two feet-securing screws from the base
of the heater and use these screws to secure the
right-angled brackets to the base of the rear panel of
the heater in the correct holes. These are the holes in
the two protruding lugs.
Mount your appliance onto the top brackets via the
two slots in the rear panel. Secure the bottom
brackets to the wall as shown.
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT: ALWAYS RETAIN YOUR USER INSTRUCTIONS
FOR FUTURE REFERENCE
Please refer to the
RF
user and operating instructions
for full operational details.
3
RF
wireless controllers
Heatstore RF Controllers
HSVTRF OR
HSVTBRF
HSTIRFN
HSPBRF
