To obtain the best performance from the heater, it is essential to avoid the
accumulation of dust and dirt on the air inlet and discharge grilles within
the unit. For this reason regular cleaning is required. Cleaning of the fan is
best carried out with a soft brush.
This product should be serviced annually as a minimum, depending on the
installation environment. Servicing shall be undertaken by a competent
person.
Service and Faults
This product has a Two Year Service Warranty. If the heater does not
operate, disconnect from the mains. A competent service engineer should
be consulted to identify the nature of the fault, or contact the Heatstore
Technical department for assistance.
Other faults in relation to the element, motor and wiring should be
identified using conventional fault finding techniques.
Thermal cut-out
These units are protected from overheating by thermal cut-outs in the event
of fan failure or an obstruction of the free airflow. If this happens the
thermal cut-outs switch off the appliance. The appliance will not operate
until the heater is disconnected from the mains supply and it has cooled
down. If this fault re-occurs again, contact the Heatstore Technical
department for assistance.
Telephone:
0117 923 5375
Fax:
0117 923 5374
Victoria Road, Avonmouth, Bristol BS11 9DB
www.heatstore.co.uk
ISSUE 1: 0912
S E R V I C E
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for recycling advice.
SPECIFICATION
HSACR3000X
3000W; 230/240V; 50Hz; 9.5kG
HSACR4500X
4500W; 230/240V; 50Hz; 9.5kG
HSACR6000
6000W; 230/240V; 50Hz; 13.5kG
Product conforms to the European electrical standard BS EN 60335-2-30.
