background image

IMPORTANT

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR 

FUTURE REFERENCE. 

Note also the information presented on the appliance

DO NOT COVER OR OBSTRUCT

 the air inlet or outlet grille.

The heater carries the Warning symbol indicating that it must not be covered. 

A ‘Do Not Cover’ warning alerts the user to the risk of fire that exists if the 

heater is accidentally covered.

WARNING - This heater must be earthed

The heater is fitted with a length of flexible cable for connection to the fixed wiring 

of the premises through a suitable double pole switched fused spur, with the fuse 

rated correctly for the appliance, positioned adjacent to the heater. The supply 

circuit to the heater must incorporate a double pole isolating switch having a 

contact separation of at least 3mm in all poles.

DO NOT

 use this heater in the immediate surroundings of a bath, shower or 

swimming pool.

DO NOT 

place heater immediately below a socket outlet.

This appliance can be used by children aged from 8 years and above and persons 

with  reduced  physical,  sensory  or  mental  capabilities  or  lack  of  experience  or 

knowledge if they have been given supervision or instruction concerning the use 

of the appliance in a safe way and understand the hazards involved. Children shall 

not play with the appliance. Cleaning and user maintenance shall not be made by 

children without supervision.

Children of less than 3 years should be kept away unless continuously supervised. 

Children  aged  from  3  years  and  less  than  8  years  shall  only  switch  on/off  the 

appliance provided that it has been placed or installed in its intended normal 

operating position and they have been given supervision or instruction concerning 

the use of the appliance in a safe way and understand the hazards involved. Children 

aged from 3 years and less than 8 years shall not plug in, regulate and clean the 

appliance or perform user maintenance.

DO NOT

 use this heater in areas where excessive dust exists.

CAUTION

 - Some parts of this product can become very hot and cause burns. 

Particular attention has to be given where children and vulnerable people are 

present.

Momentary contact with any part of the heater should not cause injury. However 

aged,  infirm  persons  or  young  children  should  not  be  left  unsupervised  in  the 

vicinity of the heater.

CAUTION: FAILURE TO FOLLOW THESE ISTRUCTIONS MAY CAUSE INJURY 

AND/OR DAMAGE AND MAY INVALIDATE YOUR GUARANTEE

2

Содержание Dynamic InteliPlinth HSDBU24








































Отзывы: