Heatrae Sadia SUPREME 150, Инструкция по установке и руководство пользователя

Страница: 8 / 20

8
5.0 INSTALLATION - VENT PIPE
5.1 Select appropriate push fit connector for chosen entry position:
Bottom entry vent 15mm x 15mm straight
Rear entry vent 15mm x 15mm 90° elbow
5.2 Push the connector fully home (28mm engagement) onto the vent
pipe connection.
5.3 Connect the vent pipe to the push fit connector ensuring it is pushed
fully home (28mm engagement). Refer to the vent pipe requirements
detailed in IMPORTANT INSTALLATION POINTS, p4. If a bottom
entry vent pipe is used the pipe must terminate below the unit, in
a safe visible position. After connection DO NOT make soldered
joints in the pipework close to the heater, as the heat may damage
the connector or the water heater itself.