Heatmiser Touch-RF, Руководство пользователя

Страница: 25 / 36

Section Header
Model: Touch-RF
24
FEATURES 1 – 5 AND 10 - 17 ARE OPTIONAL AND IN MOST CASES
NEED NOT BE ADJUSTED
Feature 01 – Temperature Format: This function allows you to select between °C or °F.
Feature 02 – Switching Differential: This function allows you to increase the switching
differential of the thermostat. The default is 1°C which means the thermostat will
switch the heating on 1°C below the set temperature and will turn it off when the set
temperature is achieved. With a 2°C differential, the heating will switch on 2°C below the
set temperature and will switch off when the set temperature is achieved.
Feature 03 – Not used on this model.
Feature 04 – Frost Protect Temperature:
This is the temperature maintained when the
thermostat is in frost mode. The range is 07-17°C. The default is 12°C and is suitable for
most applications.
Feature 05 – Output Delay: To prevent rapid switching, an output delay can be entered.
This can be set from 00 -15 minutes. The default is 00 which means there is no delay.
Feature 06 – UH8-RF or RF-Switch receiver: The thermostat can work with our UH8-RF 8
zone wiring centre or RF-Switch receiver. This setting determines which is being used.
Feature 07 – Receiver Address (UH8-RF only): Within one building, up to 99 UH8-RF’s.
Feature 08 – Zone Number (UH8-RF only): This is the zone number you are assigning
the thermostat to on the UH8-RF. Zone 01 – 08.
Feature 09 – Underfloor Heating or Radiator Zone (UH8-RF Only): This setting
determines whether the thermostat will activate the pump & boiler output on the
UH8-RF. If set to 00 the outputs will be activated. 00 = UFH, 01 = Radiators.
Optional Features Explained