Heatmiser SP OpenTherm neoHub Mini OT, Руководство пользователя

Страница: 4 / 16

*OTUBMMBUJPO1SPDFEVSF
Step 1
Using a small screwdriver, slightly loosen the screws located at the base
of the neoHub Mini. You can then carefully separate the front panel from
the back plate.
Step 2
'FFEUIFDBCMFTVQUISPVHIUIFLOPDLPVUTFDUJPOTBOEVTFUIFDBCMF
DMBNQTUPTFDVSFJOQMBDFBMUFSOBUJWFMZSFNPWFUIFLOPDLPVUTFDUJPOTJO
UIFCBDLQMBUFBOEGFFEUIFDBCMFTUISPVHIUIFCBDL
Step 3
Terminate the cables to the Iub according to your system type,
examples are shown in the wiring diagrams at the back of this manual.
Step 4
Mount the front panel onto the back plate, tighten the retaining screws
on the base. Switch on the power supply, the power MJHIU will illuminate.
3
OFP)VC.JOJ05