Heatmiser PRT-EW, Руководство пользователя

Страница: 4 / 17

6 5 Wireless
Series Model
: PRT-EW
Installation Procedure
This wireless thermostat is designed to be surface mounted.
Step 1
Carefully separate the front half of the thermostat from the back plate by placing a
small flat head terminal driver into the slots on the bottom face of the thermostat.
Step 2
If you are installing a remote air temperature probe, terminate the thermostat as
shown in the diagram on page 29.
Mark 2 hole positions on the wall using the backplate as a positioning template.
Drill at the marked positions and insert a wall plug into each hole.
Step 3
Screw the thermostat back plate securely on the wall.
Step 4
Clip the front of the thermostat back onto the thermostat back plate.
Do
Mount the thermostat at eye level.
Read the instructions fully so you get the best from our product.
Don’t
Do not install near to a direct heat source as this will affect functionality.
Do not push hard on the LCD screen as this may cause irreparable damage.
1
3
4
2