1
2
3
4
Installation Procedure
Please read the instructions fully so you get the best from our product.
LED Status
Wiring Diagram - NeoX
Power Switch
Connect Button
There are 3 LEDs in use on the neoX
Power LED Permanently on when the neoX is powered.
Link LED Permanently on once the neoX has been paired to the network.
Radio Signal LED Permanently on whilst the neoX is in range of the network.
Power LED
Link LED
Radio Signal LED
Stylish Thermostats For Modern Living
N L
Neutral
Live
230VAC
Mains Supply In
Recommendations
Max Cable Size - 1.5mm
Back Box Depth - 35mm
The neoX is designed to be flush mounted and requires a back box of 35mm
(minimum depth) to be sunk into the wall prior to installation.
Step 1
Carefully separate the front half of the neoX from the back plate by placing
a small flat head terminal driver into the slots on the bottom face of the neoX.
Step 2
Place the neoX front somewhere safe.
Terminate the neoX as shown in the wiring diagram.
Step 3
Screw the neoX back plate securely into the back box.
Step 4
Clip the front of the neoX back onto the neoX back plate.
