background image

28

17804 Rev i

08/04

HEATILATOR WOODBURNING FIREPLACE

LIMITED WARRANTY

As part of its

20-YEAR BUYER PROTECTION PROGRAM

AS PART OF ITS 20 YEAR BUYER PROTECTION PROGRAM (“PROGRAM”), HEARTH & HOME TECHNOLOGIES INC. (“HHT”)

 

is

pleased to offer a Limited Warranty and a Replacement Parts Advantage covering specific components of your Heatilator

 woodburning

fireplace system ( the “Fireplace”), installed in the United States of America or Canada.  Dealers and employees of 

HHT

 have no authority to

make any warranty or authorize any remedies in addition to or inconsistent with the terms of this Program

.

Limited Warranty

HHT

 warrants the following components of your Heatilator woodburning fireplace to be free from original defects in material and workmanship

during the applicable periods described: five years for the firebox assembly, chimney system and roof termination; two years for refractory
firebox liners; and one year for the grate, wire mesh screens, fan system, outside air system, and glass doors.  All limited warranty periods
run from the date of initial installation of your Fireplace (the “Installation Date”).  The Limited Warranty is subject to the conditions, exclusions
and limitations of liability listed below.

Replacement Parts Advantage

Under 

HHT

’s Replacement Parts Advantage, for a period of twenty years from your Installation Date of your Fireplace, if available, 

HHT

 will

provide you with repair or replacement parts for defective components which are no longer under their applicable Limited Warranty, at 50%
of the then current retail list price for such components.  

HHT

 shall have no responsibility for freight and labor charges related to such parts.

Conditions, Exclusions, & Limitations of Liability

A.

Both the Limited Warranty and Replacement Parts Advantage supplied by 

HHT

 apply only while the Fireplace is in its location of

original installation.  

HHT

’s obligation under this warranty does not extend to damages resulting from (1) installation, operation or

maintenance of the Fireplace not in accordance with the Installation Instructions, Operating Instructions, and the Listing Agent Identification
Label furnished with the Appliance; (2) installation which does not comply with local building codes; (3) shipping, improper handling,
improper operation, abuse, misuse, accident or unworkmanlike repairs; (4) environmental conditions, inadequate ventilation or drafting
caused by tight sealing construction of the structure, air handling devices such as exhaust fans or forced air furnaces, or other
causes;  (5) use of fuels other than those specified in the Operating Instructions; (6) installation or use of components not supplied
with the Fireplace or any other components not expressly authorized and approved by 

HHT

; and/or (7) modification of the Fireplace not

expressly authorized and approved by 

HHT

 in writing. This warranty is limited to only the component parts manufactured or supplied

by 

HHT

.

B.

During the first year of the Limited Warranty, 

HHT

 will, at its sole option, repair or replace any covered defective component and will

provide replacement parts at no charge. And will pay reasonable labor and freight costs.  During the second through the fifth years of
the Limited Warranty (if applicable), 

HHT

 will provide replacement parts free of charge for any covered defective component, but will

not pay for freight or labor costs related to the shipment of the parts or the actual repair or replacement.  After the fifth anniversary of
the Installation date, 

HHT

’s sole obligation and your exclusive remedy is set forth in 

HHT

’s Replacement Parts Advantage described

above.  

In no event shall HHT be liable for any incidental or consequential damages caused by defects in your Fireplace.

C.

EXCEPT TO THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE   WARRANTY SPECIFIED
HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE WARRANTY SPECIFIED ABOVE.

D.

Some states do not allow exclusions or limitations of incidental or consequential damages, so those limitations may not apply to you.
This warranty gives you specific rights; you may also have other rights which vary from state to state.

How to Obtain Service

1.

To obtain service under this warranty you must:

2.

Send written notice of the claimed condition to Heatilator Technical Service Department, Hearth & Home Technologies, 1915 W. Saunders
Street, Mt. Pleasant, Iowa 52641-1563.  You may also register your claim online at www.heatilator.com/contact.asp.

3.

Provide proof of purchase, model number, serial number, and manufacturing date code to 

HHT

.

4.

Provide 

HHT

 reasonable opportunity to investigate the claim, including reasonable opportunity to inspect the Appliance prior to any

repair or replacement work and before the Appliance or any component of the Appliance has been removed from the place of original
installation.

5.

Obtain 

HHT

’s consent to any warranty work before the work is done.

ADDITIONAL INFORMATION: 

If you would like information on current HEATILATOR products or want to locate a dealer in your area, call

1-800-927-6841.

2003 Heatilator is a Registered Trademark of Hearth & Home Technologies Inc.

Содержание MH36A





























Отзывы: