09/04
30484 Rev Q
11
MAXUS DIRECT VENT HEATER
3. Rear Venting
a.
Attach the collars supplied. See Figure 5.
b.
When attaching the 14 in. square plate with an 8 in. hole, there is a heat shield attached. This must be up and
face out (away from the appliance).
Figure 5
WARNING!
If not sealed, a fire hazard will be created and
the appliance will not operate properly.
The opening on the
top of the appliance
must be sealed with
an insulated cover.
When rear venting,
seal the unused top
o p e n i n g w i t h t h e
solid cover with the
i n s u l a t i o n ( i n s t a l l
with the insulation
down).
When top venting,
use the plate with an
8 i n . o p e n i n g a n d
i n s u l a t i o n ( i n s t a l l
with the insulation
down).
WARNING!
The top opening must be
enclosed with the insulated
cover.
When installing this plate, the
heat shield must face upwards
and out (away from the
appliance).