11
Heatilator • ION-V7, ION-S7, ION-H7 Owner’s Manual • 2276-981 Rev. E • 5/17
G. Appliance Break-In
Initial Break-in Procedure
• The fireplace should be run three to four hours
continuously on high.
• Turn the
fi
replace off and allow it to completely cool.
• Remove
fi
xed glass assembly. See Figure 4.1.
• Clean
fi
xed glass assembly. See Section 4.B.
• Replace the
fi
xed glass assembly and run continuously
on high an additional 8-12 hours.
This cures the materials used to manufacture the
fi
re-
place.
NOTICE! Open windows for air circulation during
fi
re-
place break-in.
• Some people may be sensitive to smoke and odors.
• Smoke detectors may activate.
H. Heat Management
Heat Output is managed through the RC200 remote con-
trol that comes standard with the
fi
replace.
• Turn the appliance on and off.
• Adjust the height of the
fl
ame by varying the input using
the remote control.
For more information, see the instructions that accompany
the remote control.