Heatilator Fi36M, Инструкция по установке и эксплуатации, Страница: 4 / 24

4 33734 Rev N 6/15
These gas log sets are available with different valve systems. The Fi36S, Fi36SL, Fi42S and Fi42SL sets use a separate
regulator and valve system, and the Fi36M, Fi36ML, Fi42M and Fi42ML sets use a combination control with an intermit -
tent pilot. Both valve systems are available in natural or propane gas. Only the “M” Series can be used with an optional
remote control (RC-BATT-HTL).
Conversion kits to convert from natural gas to propane or from propane to natural gas are available.
• The conversion kits for all “M” series log sets are:
- dcKp to convert from natural gas to propane
- dcKn to convert from propane to natural gas.
• The conversion kits for all “S” series log sets are:
- cKmp to convert from natural to propane gas
- cKmn to convert from propane to natural gas.
These HEATILATOR® gas log sets and components have been tested and will operate safely when installed in accor -
dance with this installation manual. This decorative appliance is a highly engineered system. Unless you use HEATILA -
TOR® components which have been designed for the system, you may create a fire hazard.
Gas pressure
BTU/hr. Input
model no. Btu/hr. Input Orifice
Fi36M
60,000
.152
Fi36ML .093
Fi36S .169
Fi36SL .093
Fi42M
80,000
.182
Fi42ML .110
Fi42S .228
Fi42SL .110
gas pressure
Inlet gas supply pressure (NG) 4.5 (min) - 7.0 (max) in. w.c.
Optimal manifold pressure (NG) 3.5 in. w.c.
Inlet gas supply pressure (LP)
11.0 (min) - 14.0 (max) in. w.c.
Optimum manifold pressure (LP) 10 in. w.c.