Heatilator • Eclipse • 4049-300 Rev H • 11/07
35
• Locate and attach left and right trim strips (see Figure 12.7
for parts identi
fi
cation) using four #10 x 1 in. screws from
fastener pack. See Figure 12.9.
Figure 12.9 Attach Side Trim Strips
• Engage screws only a few threads; trim strips must remain
loose at this time.
• Wipe any dust from backs of surround pieces and wall
around appliance opening with a clean cloth.
• Apply a 1/4 in. diameter bead of high temperature, silicone
caulking approximately 1 in. from the outside edge of the
surround piece, on top and side
fl
anges of appliance. See
Figure 12.10
• Mount left leg to appliance by holding back trim strips and
engaging tabs in surround brackets with screws holding
trim strips. See Figure 12.11
Caulk
Figure 12.10 Caulk Surround Back
• Gently press surround against wall. Adjust trim strip so
edge is in the groove in the surround edge.
• Tighten screws holding trim strip. See Figure 12.12.
Tabs between
Trim Strip and
Appliance
Figure 12.11 Mount Left Leg
• Repeat with right leg.
Trim Strip
Fits into Groove-
Tighten Screws
Figure 12.12 Trim Strips Fit into Groove in Surround
Open end
of clip
Brake
in front
