Heatilator ECO-ADV-PS35 Скачать руководство пользователя страница 38

Страница: 38 / 56

Heatilator • ECO-ADV-PS35/50 • 7058-142D • July 21, 2010

3 to 3 inch Top Vent Adapter

3 to 6 inch Top Vent Offset Adapter

1. Put a layer of high temperature silicone on the 3

inch (76mm) exhaust outlet.

Do not put silicone

inside of pipe. Figure 38.1

2. Slide the top vent adapter onto the rear exhaust

outlet and adjust the assembly to a vertical position.

Figure 38.1.

3. Drill 4 holes with #26 drill bit (provided) into the

back of the appliance using the outer shield as a

pattern (make sure the assembly is vertical).

Figure

38.2.

4. Install the 4 mounting screws.

5. Drill 2 holes with #26 drill bit through the rear

exhaust outlet using the 2 holes already in the short

horizontal pipe in the top vent adapter as a guide.

Install the 2 screws.

Figure 38.1.

6. Install the vent pipe into the top vent adapter (be

sure to silicone all joints).

7. To clean the top vent adapter open the clean-out

cover.

Figure 38.2.

B. Top Vent Adapter Installation

Silicone Rear Exhaust Outlet

3 to 6 inch

Offset Adapter

3 to 3 inch

Offset Adapter

Use Hole on Each

Side as Drilling Guide

Drill holes in back of

stove and secure with 4

screws, 2 on each side

Clean-Out Cover

Figure 38.2

Figure 38.1

Installing the Top Vent Adapter

C. Rear Vent and Rear Vent to Top Vent

Adapter Installation

Clean-Out Cover

Figure 38.3 - Rear Vent Adapter

Figure 38.4 - Rear to Top Vent Adapter - 90

1. Put a layer of high temperature silicone on the 3 inch

(76mm) exhaust outlet.

Do not put silicone inside of

pipe. Figure 38.1.

2. Slide the adapter onto the rear exhaust outlet and adjust

the assembly to the appropriate position.

3. Install the vent pipe into the adapter (be sure to silicone

all joints)

Содержание ECO-ADV-PS35

























































Результаты поиска

Содержание ECO-ADV-PS35

Отзывы:

Heatilator ECO-ADV-PS35, Руководство пользователя по установке и эксплуатации, Страница: 38 / 56

Результаты поиска

Содержание ECO-ADV-PS35

Отзывы: