manualshive.com logo in svg

Heatilator ECLIPSE-32, Руководство по установке

Owner's Manual для камина Heatilator ECLIPSE-32 доступен для загрузки совершенно бесплатно на нашем сайте. Этот подробный мануал поможет вам настроить и использовать ваш камин на максимуме его возможностей. Скачайте руководство сейчас для лучшего опыта использования продукта. manualshive.com.

Поделиться
Скачать
background image

2

Heatilator  • ECLIPSE-32, ECLIPSE-36 Installation Manual  •  2297-984 Rev. B   •  6/15 

    Safety Alert Key:

• DANGER! 

Indicates a hazardous situation which, if not avoided will result in death or serious injury.

• WARNING! 

Indicates a hazardous situation which, if not avoided could result in death or serious injury.

• CAUTION!

 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

• NOTICE:

 Used to address practices not related to personal injury.

Table of Contents

Installation Standard Work Checklist . . . . . . . . . . . . . . . . . . . . 3

1 Product Speci

fi

 c and Important Safety Information  

A. Appliance Certi

fi

 cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

B. Glass Speci

fi

 cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

C. BTU Speci

fi

 cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

D.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . . 4
E.  Non-Combustible Materials Speci

fi

 cation. . . . . . . . . . . . . . 4

F.  Combustible Materials Speci

fi

 cation  . . . . . . . . . . . . . . . . . 4

G. Electrical Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
H.  Requirements for the Commonwealth of Massachusetts . . 5

2 Getting Started 

A.  Design and Installation Considerations . . . . . . . . . . . . . . . 6
B.  Tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . . . . 6
C.  Inspect Appliance and Components . . . . . . . . . . . . . . . . . . 6

3 Framing and Clearances 

 

A.  Appliance/Decorative Front Dimension Diagrams . . . . . . . 7
B.  Clearances to Combustibles  . . . . . . . . . . . . . . . . . . . . . . . 9
C.  Constructing the Appliance Chase . . . . . . . . . . . . . . . . . . 10
D.  Floor Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4 Termination Location and Vent Information   

A.  Vent Termination Minimum Clearances . . . . . . . . . . . . . .  11
B.  Chimney Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
C.  Approved Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
D.  Use of Elbows  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
E.  Measuring Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
F.  Use of Flex Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
G. Vent Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5 Vent Clearances and Framing 

 

A.  Pipe Clearances to Combustibles  . . . . . . . . . . . . . . . . . . 28
B.  Wall Penetration Framing/Firestops . . . . . . . . . . . . . . . . . 28
C.  Ceiling Firestop/Floor Penetration Framing . . . . . . . . . . . 29
D.  Install Attic Insulation Shield . . . . . . . . . . . . . . . . . . . . . . . 29

6 Appliance Preparation 

A.  Vent Collar Preparation - Top or Rear  . . . . . . . . . . . . . . . 30
B.  Securing and Leveling the Appliance . . . . . . . . . . . . . . . . 32

7 Venting and Chimneys 

 

A.  Assemble Vent Sections (DVP Pipe) . . . . . . . . . . . . . . . . 33
B.  Assemble Vent Sections (SLP Pipe)  . . . . . . . . . . . . . . . . 34
C.  Assemble Slip Sections . . . . . . . . . . . . . . . . . . . . . . . . . . 34
D.  Secure the Vent Sections . . . . . . . . . . . . . . . . . . . . . . . . . 35
E.  Disassemble Vent Sections . . . . . . . . . . . . . . . . . . . . . . . 35
F. Vertical Termination Requirements 

. . . . . . . . . . . . . . . . . . 36

G. Horizontal Termination Requirements  . . . . . . . . . . . . . . . 37

8 Electrical Information 

A.  General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
B.  Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

9 Gas Information 

A.  Fuel Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
B.  Gas Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
C.  Gas Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
D.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . 42
E.  Air Shutter Setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

10 Finishing 

A.  Facing and Finishing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B.  Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 45

11 Appliance Setup 

A.  Remove Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . 46
B.  Remove the Shipping Materials . . . . . . . . . . . . . . . . . . . . 46
C.  Clean the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
D.  Install the Stones and Lava Rock . . . . . . . . . . . . . . . . . . . 47
E.  Install Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . . . 48
F.  Install Decorative Front  . . . . . . . . . . . . . . . . . . . . . . . . . . 48

12 Reference Materials 

 

A.  Vent Components Diagrams  . . . . . . . . . . . . . . . . . . . . . . 49
B.  Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

 =  Contains updated information.

Содержание ECLIPSE-32




























































Отзывы:

Нет отзывов

Похожие инструкции для ECLIPSE-32

HAMPTON BAY 1000 Use And Care Manual preview
1000
Бренд: HAMPTON BAY Страницы: 9
Napoleon B42NTRE Installation And Operating Instructions Manual preview
B42NTRE
Бренд: Napoleon Страницы: 144
United States Stove Company VFZC36 Owner'S Operation And Installation Manual preview
VFZC36
Бренд: United States Stove Company Страницы: 20
Pur Line EFP68 Manual preview
EFP68
Бренд: Pur Line Страницы: 12
Renaissance Fireplaces LINEAR 50 Addendum To Manual preview
LINEAR 50
Бренд: Renaissance Fireplaces Страницы: 2
Cast Tec Integra SuperSlim Slide Control Installation And User Instructions Manual preview
Integra SuperSlim Slide Control
Бренд: Cast Tec Страницы: 16
HAMPTON BAY 69830 Use And Care Manual preview
69830
Бренд: HAMPTON BAY Страницы: 7
Pur Line CHE-610 User Manual preview
CHE-610
Бренд: Pur Line Страницы: 48
Desa W32GO Assembly And Installation Instructions preview
W32GO
Бренд: Desa Страницы: 4
JC BORDELET CALISTA 917 Instruction Manual preview
CALISTA 917
Бренд: JC BORDELET Страницы: 15
Napoleon Luminex Series Installation And Operation Manual preview
Luminex Series
Бренд: Napoleon Страницы: 80
Napoleon Astound-Built In Series Installation And Operation Manual preview
Astound-Built In Series
Бренд: Napoleon Страницы: 80
tropitone 401442FP Installation And Operating Instructions Manual preview
401442FP
Бренд: tropitone Страницы: 16
Mendota ML39-PF2 Installation And Operating Instruction Manual preview
ML39-PF2
Бренд: Mendota Страницы: 80
Mendota FULLVIEW AA-11-02591 Installation And Operating Instruction Manual preview
FULLVIEW AA-11-02591
Бренд: Mendota Страницы: 80
Mendota FV33I Gen 3 Installation And Operating Instructions Manual preview
FV33I Gen 3
Бренд: Mendota Страницы: 96
Dik Geurts Britta User Manual preview
Britta
Бренд: Dik Geurts Страницы: 52
CHAD-O-CHEF VFDS 800 Installation & Operating Instruction Manual preview
VFDS 800
Бренд: CHAD-O-CHEF Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды