Heat & Glo • CFL-24NG/LP, CFL-24NG/LP-B, CFL-24NG/LP-C • 481-926 Rev. E • 9/21
3
Install Mineral Wool
Remove the mineral wool from the packaging and place
dime size pieces on the top of the burner, spaced a dime’s
width apart. Care should be taken to avoid placing ember
material directly over ports and to avoid using excessive
amounts of ember material.
WARNING! Risk of Explosion!
Follow ember placement
instructions. DO NOT place embers directly over burner
ports. Replace ember material annually. Improperly
placed embers interfere with proper burner operation.
• Embers CANNOT be placed directly over ports. Care
should be taken not to cover the lighting trail of ports
(from back to front).
• When placing Glowing Embers onto the burner care
should be taken so that the ports are not covered. Place
the dime-size ember pieces near the port holes in the
burner top. Failure to follow this procedure will likely cause
lighting and sooting problems.
Install Vermiculite
Vermiculite may be used for aesthetic enhancement, if
desired. Sprinkle the vermiculite
on the interior floor of the
fireplace as shown in the figure below.
Do not place ver-
miculite on burner. Care should be taken to avoid using
excessive amounts of vermiculite.
WARNING!
Risk of Explosion or Delayed Ignition! DO
NOT place vermiculite on burner.
Place Vermiculite