23
Heatilator • ECO-ADV-WS22 • 7057-128D • September 15, 2011
D. Door Handle Assembly
1. Install washer on door handle shaft.
2. Slide door handle through door.
3. Install second washer(s) as shown in
Figure 23.1.
4. Install key in groove.
5. Align groove in latch cam with key; slide latch cam over
shaft
6. Install locknut but do not overtighten, the handle needs
to move smoothly.
7. Install spring handle turning in a counter-clockwise mo-
tion to desired location on door handle rod.
Figure 23.1
CAUTION! Do not overtighten lock nut. The door handle
needs to move smoothly.
Locknut
Door Cross Section
(example)
Latch Cam
Spacing
Washers
Square Key
Door Handle
Spring
Handle