7
Getting Started
1.
Remove the contents from the package, examining them carefully for breakage, defects,
or missing parts. Save the packaging.
2.
Place shaker on a sturdy, level surface away 30 cm from the edge of the counter and other
moving equipment. Allow 8 cm (3” ) of clearance around the unit for platform movement,
accessory attachments, and user convenience. Make sure the power cord is clear of hot
surfaces, sharp edges, and other hazards.
3.
Verify that the power switch is in the OFF position. Plug the power adapter cord into the
rear of the shaker. Select the appropriate power plug attach to power adapter, and plug
into an appropriate, grounded outlet.
Note: — Leave shaker disconnected when not in use.
4.
Turn power switch ON.
5.
Rotate speed control knob counter clockwise until display reads 20 rpm. Press speed
control knob once to turn shaker on. If there is a smooth whirring sound and the platform
accelerates with little or no vibration, Digital Orbital Shaker is ready to use. If there are
loud or unusual sounds, or excessive vibration, DO NOT OPERATE. Contact Heathrow
Scientific
®
LLC Technical Support.
6.
Before filling a container or vessel, it is recommended to test stability. Secure vessel on
platform in middle position.
7.
Press speed control knob once to turn on shaker. Make sure the vessel will not tip, teeter,
walk, or slide to assure safe mixing.
8.
Fill vessels for shaking. Vessels should contain a stopper or be covered to prevent spills.
9.
Secure all vessels.
Notes: — Do not operate with an unbalanced load.
— Partial loads should be centered to evenly distribute weight over bearings
for longer shaker life.
WARNING!
Do not lift shaker by the platform.
CAUTION!
If the top platform becomes jammed, it will not rotate. Keep platform free and clear
of obstacles.
WARNING!
Do not operate shaker with a damaged electrical cord.
