Helpful Videos – www.hzsupport.com
Helpful Answers – 1-800-858-8501
2
TUNE
– HO
LD
1 S
ECON
D.
SYNC
– HO
LD
3 S
ECON
DS.
RESE
T – H
OLD
10 S
ECON
DS.
4. Mount push button. Use either screws or double
sided tape to mount push button.
•
Screw Mounting: To mount with screws, remove
back of case by pushing in tab on bottom with a
small screwdriver (see Figure 1). Note: Remove
material in screw holes (if needed) before mounting
with screws. Attach back of case to door jamb or
wall (see Figure 4). Snap front of push button on.
•
Tape Mounting: When attaching push button
using double sided tape, make sure the surface
of the door jamb or wall is clean.
5. Mount chime. Determine mounting location.
• Drill 7/32" (5.5 mm) diameter pilot hole for wall
anchor.
• Mount keyhole screw to wall leaving about 1/8"
(3 mm) of the screw threads exposed.
• Using keyhole on back of chime base, hang base
on screw (see Figure 5).
Figure 5
Figure 4
Keyhole Slot
Keyhole Screw
