CAUTION!
USE HEATER PITCHING MACHINE BALLS FOR THE MOST ACCURATE PITCH POSSIBLE.
PITCHING MACHINES THAT USE A WHEEL TO THROW BALLS WILL NOT THROW REAL BALLS
AS ACCURATE BECAUSE OF THE SEAMS ON THE BALL.
IMPORTANT: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS
TURNED OFF BEFORE ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL
EXIT! SERIOUS HAND AND BODILY INJURY MAY RESULT IF USED INCORRECTLY!
Step 1:
Insert auto-ball feeder tubes into auto-ball feeder bracket (2X) and plug into outlet.
Step 2:
Place balls into ball feeder. (Make sure the pitching machine is not plugged in.)
Step 3:
Ensure pitching machine variable speed control knobs both show "0".
Step 4:
Plug pitching machine into 3 prong power outlet (Make sure pitching machine
wheels are not spinning.)
Step 5:
Aim pitching machine at desired target and make sure every person and everything
is clear of pitching machine ball path.
Step 6:
Turn variable speed control knobs on to desired speed setting and turn on auto-ball
feeder
(Note: Setting each speed control to varying settings controls the amount of
curve on the pitch)
Step 7:
Make sure ball is pitching in desired zone before allowing a batter to step up to hit.
Step 8:
Adjust pitch height by loosening the Pitch Height Adjustment Knob and rotating
the Baseball Housing to desired location. Re-tighten when done.
Step 9:
Once balls are done pitching, turn both machine & ballfeeder off before collecting
balls to ensure no bodily injury occurs.
Auto-Ball Feeder Bracket
Fast Ball/Curve ball Adjustment
Pitch Height Adjustment
Ball Speed Adjustment
Tire Access Panel
Auto-Ball Feeder Plug
Receptacle
OPERATION
7
www.HeaterSports.com
800-492-9334
