STEP 1:
Slide the Tripod Bracket (B) over
the U-shape arms of housing and align
bolt holes. (
Make sure the swivel groove
is toward the back of the machine)
STEP 2:
Place 2 Black Washers (M)
between the housing and tripod, then
line up to bolt holes. Slide flat washer (L)
on Hex Head Bolt (I) and insert through
the front tripod hole. Then, add another
flat washer (L) once through and securely
tighten with Silver Locknut (O).
Flat Washer (L)
STEP 3:
On the other side of the tripod,
push the two Black Plastic Washers (M
x2) in place between the Tripod Bracket
and the U-shape arm as shown and line
up the holes in the washer to the holes
in the tripod slot.
STEP 4:
Insert Carriage Bolt (D). Place
Thick Metal Washer (K) and Teeth Washer
(N) on the bolt and tighten with the Knob
(P).
Plastic Washer
(M) x2
HOUSING ASSEMBLY
Tripod (B)
Front of
Housing
Silver Locknut
(O)
Silver Head Bolt (I)
4
www.HeaterSports.com
800-492-9334
Carriage Bolt
(J)
Plastic Washer
(M) x2
Thick Washer
(K)
Teeth Washer
(N)
Knob
(P)
