6
ATTENTION
Ensure that no pipes or cables are laid in the wall beneath the mounting location that could be damaged by the
installation.
5
Supply line at the heatcon! WG
The electrical installation must be carried out with fixed wiring in accordance with DIN VDE 0100-520.
The supply line must be protected by the emergency heating switch.
6
Connection terminals
The sensors, pumps and other components are connected according to the connection diagram in the housing ceiling
of the wall-mounted housing.
The setup wizard of the heatcon! EC preassigns the inputs and outputs. When wiring, pay attention to the desired
functions according to the preassignment of the connection terminals.
DANGER
When wiring, make sure that all live devices are voltage-free.
7
Installation (Parameterization) heatcon! EC
The installation of the heatcon! EC is carried out via a menu-driven setup wizard.
7.1
Installation via MMI
After power on, the setup wizard appears in the MMI.
Install the heatcon! EC as described in the short instructions included the device. Detailed installation
instructions for the heatcon! Systems can be found at
