Heat & Glo • TIARII-BK-IPI, TIARII-BR-IPI, TIARII-CES-IPI Owner’s Manual • 2340-981 • 6/14
6
C. BTU Specifications
This product is listed to AnSI standards for “Vented gas
Fireplace heaters” and applicable sections of “gas Burn
-
ing heating Appliances for Manufactured homes and
Recreational Vehicles”, and “gas Fired Appliances for
Use at high Altitudes”.
A. Appliance Certification
NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.
this appliance is tested and approved as either supplemen
-
tal room heat or as a decorative appliance. It should not be
factored as primary heat in residential heating calculations.
NOTICE: This installation must conform with local codes.
In the absence of local codes you must comply with the
National Fuel Gas Code, ANSI Z223.1-latest edition in
the U.S.A. and the CAN/CGA B149 Installation Codes in
Canada.
2
Product Specific Information
B. Glass Specifications (Ceramic)
this appliance is equipped with 5 mm ceramic glass. Re
-
place glass only with 5 mm ceramic glass. Please contact
your dealer for replacement glass.
Installation and service of this appliance should be
performed by qualified personnel. hearth & home
technologies suggests NFI certified or factory
trained professionals, or technicians supervised by
an NFI certified professional (www.nficertified.org).
Models
(U.S. or Canada)
Maximum
Input
BTU/h
Minimum
Input
BTU/h
Orifice
Size
(DMS)
tIARII-BK-IPI
tIARII-BR-IPI
tIARII-cES-IPI
(ng)
(0-2000 FT)
37,000 26,000
#32
tIARII-BK-IPI
tIARII-BR-IPI
tIARII-cES-IPI
(lP)
(0-2000 FT)
34,000 26,000
#50
MODELS:
TIARII-BK-IPI, TIARII-BR-IPI, TIARII-CES-IPI
LABORATORY:
Underwriters Laboratories, Inc. (UL)
TYPE:
Direct Vent Heater
STANDARD:
ANSI Z21.88-2009/CSA 2.33-2009
