
47
Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. Q • 8/14
D. Finishing Material Options
Finishing Material Thickness from 3/4 in. to 1-1/4 in.
Finishing material within this thickness range can be
brought to 1/2 inch behind the door top and sides. These
non-combustible finishing materials must never overlap or
obstruct the air outlet/inlet grille areas.
Figure 13.9
Finishing Material Thickness greater than 1-1/4 inch
A steel template (Cerona-36 Template or Cerona-42 Tem
-
plate) is available for purchase to use instead of construct
-
ing a template.
Non-combustible facing material is supplied with this appliance. This
material extends from the header to one inch above the appliance
bottom and from framing stud to framing stud.
Figure 13.10 Facing Template Dimensions
IMPORTANT INSTALLATION
Note:
Please note that there are four holes or dots on
the template to assist in positioning the template. These
holes or dots should line up with the door mounting
holes on the unit to ensure proper placement of the
door after finishing materials are installed.
A
B
Cerona-36
in.
43-5/8 50-3/16
mm
1108
1275
Cerona-42
in.
50-5/8
54-3/8
mm
1286
1381
F
D
C
B
A
R I
Ø H
E
G
A
B
C
D
E
Cerona-36
in. 34-1/2 23-9/16 5-3/16 1-1/4
38
mm
876
598
132
32
965
Cerona-42
in. 38-7/8 25-1/4
3-5/8 2-5/8 46-1/4
mm
987
641
92
67
1175
F
G
H
I
Cerona-36
in. 1-1/4 28-13/16 3/8 34-5/8
mm
32
732
10
879
Cerona-42
in. 2-5/8 31-7/16
3/8 39-5/8
mm
67
799
10
1006
A
B
HEADER
NON-COMBUSTIBLE FINISHING MATERIAL
(INSTALLED OVER NON-COMBUSTIBLE
FACING MATERIAL)
1 IN.
(25 mm)
Note:
when mounting ATRIMSToNE-36 oR ATRIMSToNE-42
you must install template or front to insure proper positioning.
Failure to do so will result in the front not fitting (see Figure
13.9).
Mounting stone eye brow: ATRIMSTONE-36,
ATRIMSTONE-42