background image

1

MC

Quick Reference Guide

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

1. Before permanently placing your infrared heater, plug it into a 
   convenient outlet to verify that the circuit breakers 
   for the outlet  are on.
2. The heater may emit a slight, harmless odor when first used.
    This odor is normal and is caused by the initial heating of internal
    heater parts and will not occur again.
3. If your electrical heater does not emit heat, consult your owner’s
    manual for further information.
4. An anti tilt switch has been installed in the heater.  Please ensure that the 
    heater will be placed in a horizontal position when in use.  If the heater is 
    tilted or tipped over, it will shut down.  Return the heater to its original 
    horizontal position and the heater can be turned on again.”

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

NO USER-SERVICEABLE PARTS INSIDE

HIGH TEMPERATURE

KEEP DRAPERY AND OTHER FURNISHINGS AT LEAST 3 FEET / .9 METER 
FROM THE FRONT AND SIDES OF THE ELECTRICAL HEATER.

WARNING:

1. WARNING: TO REDUCE THE RISK OF FIRE – KEEP COMBUSTIBLE MATERIAL 

SUCH AS FURNITURE, PAPERS, CLOTHES, AND CURTAINS AT LEAST 3 FEET (0.9 

M) FROM THE FRONT OF THE HEATER AND AWAY FROM THE SIDES  AND REAR.
2. SERVICING SHOULD BE DONE ONLY WHILE THE ELECTRICAL HEATER IS 

DISCONNECTED FROM THE POWER SUPPLY.

SPECIAL CHARACTERISTICS.

A) This heater is ideal for use all year round, even when central 
    heating has been turned off. 
B) This heater produces a hot current of air.

UNPACKING AND INSTALLING THE ELECTRICAL HEATER.

1. Open the packaging carefully and remove the heater.
2. Remove and discard the plastic bag. 
3. 

BE RESPONSIBLE HANDLING THE PACKING MATERIALS.

    WARNING: KEEP PLASTIC WRAPPING AWAY FROM CHILDREN.

4. Keep the original packing for future transport and/or storage.
5. Keep the front of the unit, through which the heat is radiated, 
   at least 3 feet / .9 meter away from furniture, curtains and 
   other flammable objects / materials at all times.
6. Ensure there is a grounded socket nearby (back of the appliance).
7. The power cord must remain at the back of the appliance 
    and must not be in contact with any hot element.

IMPORTANT SAFETY INSTRUCTIONS

!

C

AUTION:

 BEFORE OPERATING THIS

EQUIPMENT, PLEASE READ THESE

INSTRUCTIONS CAREFULLY.

!

SA 1965

SA 1965

MC

Call 1-877-744-3649 for assistance or email us at [email protected]

WAVE

HEAT

Содержание Blythe EA1240









Отзывы: