Heat Trap Hybrid Heat Pump Installation & O
2.11.
Relief Valves are not required
The Heat Trap Heat pump is a low pressu
pressure tank. This is done automatically.
There is no need for the relief of any expansion or relief
2.12.
Anodes are not required
The Heat Trap Solar Hybrid Tank is entirely constructed of non
made from polyethylene and conforms to AS/NZS 2712.
The Heat Trap hybrid tank does not require an anode
Before installation, the installer must ensure that the installat
compromise the structural integrity of the building.
Heat Trap Hybrid Heat Pump Installation & O
are not required.
Heat pump is a low pressure system. Any expansion is taken up within the low
pressure tank. This is done automatically.
for the relief of any expansion or relief valves.
s are not required
Solar Hybrid Tank is entirely constructed of non-ferrous materials. The container is
made from polyethylene and conforms to AS/NZS 2712.
hybrid tank does not require an anode and there is no anode to be replaced.
Before installation, the installer must ensure that the installation of the hot water system shall
compromise the structural integrity of the building.
Heat Trap Hybrid Heat Pump Installation & Operating Instructions
9
Any expansion is taken up within the low
s materials. The container is
to be replaced.
ter system shall not
