Heat Trap Hybrid Heat Pump Installation & O
4.
Electrical installation
The electrical supply to the heat pump
not be used.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
qualified person.
The Heat Trap EMS control system has no user adjustable parameters and cannot be changed
control parameters have been designed to achieve maximum efficiency and have been used
determine the amount of Small Technology Credits that you will receive.
located inside the weatherproof cover on the front of the Heat Trap
display facility. This cover should not be removed unless by a trained technician as this may
compromise the weather protection and cause failure. The EMS system will not be affected by an off
peak ripple system.
Heat Trap Hybrid Heat Pump Installation & O
nstallation
The electrical supply to the heat pump and controller must be continuously available. Off Peak power must
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
The Heat Trap EMS control system has no user adjustable parameters and cannot be changed
control parameters have been designed to achieve maximum efficiency and have been used
determine the amount of Small Technology Credits that you will receive. The controller board is
located inside the weatherproof cover on the front of the Heat Trap tank and has no keypad or
display facility. This cover should not be removed unless by a trained technician as this may
compromise the weather protection and cause failure. The EMS system will not be affected by an off
Heat Trap Hybrid Heat Pump Installation & Operating Instructions
11
vailable. Off Peak power must
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a suitably
The Heat Trap EMS control system has no user adjustable parameters and cannot be changed. The
control parameters have been designed to achieve maximum efficiency and have been used
The controller board is
tank and has no keypad or
display facility. This cover should not be removed unless by a trained technician as this may
compromise the weather protection and cause failure. The EMS system will not be affected by an off-
