heat-timer MPCQ Platinum Скачать руководство пользователя страница 27

Страница: 27 / 40

MPCQ Platinum Installation and Operation Manual

• If Manual Boost feature is being used, it uses the Day #1 time on (1st setting of that day) as a Boost calculation starting point.

• If Vari-Boost feature is being used, it uses the Day #1 time on (1st setting of that day) as a Boost calculation ending point.

• The actual Boost start time varies depending on the Outdoor Temperature (OD) and Boost Adjustment. See page

22.

• The Night Time settings lets the MPCQ Platinum follow the cycle based on the Night Outdoor Cutoff, Night Heat Adjustment,

and Night Space Target (when Cycle is selected as the Operation Mode). Furthermore, if the Early Shutdown feature is being set,
it uses the last Night Time setting of that weekday as an Early Shutdown calculation ending point. In this case, the actual Early
Shutdown start time will vary based on Outdoor temperature and Boost Adjustment. See page 22.

• In this area of the MPCQ Platinum control menu 3 buttons will take effect. The NEXT button will allow the scroll between the 4

different settings of a specific weekday. The BOILER/DAY button will allow the scroll between all weekdays. The PREV/DEL

button will erase the Day Time and Night Time settings for a specific day schedule.

• When setting the date and time over the Internet, type each time value in a (hh:mm AM) format. Then, press the Enter on your

keyboard after each field.

Schedule Example

♦

♦♦

♦ No boost will take effect.

♦♦ Early Shut Down ends. Night Schedule begins

Weekday

Cycle

Set Point

Monday
through
Thursday

• Vari-Boost begins before 6 AM and ends at 6 AM

♦

• Day Cutoff, Day Heat Adjustment, and Day Space

Target are maintained from 6 AM until before 10 PM

• Early Shutdown starts before 10 PM and ends at 10 PM

• Night Cutoff, Night Heat Adjustment, and Night Space

Target are maintained from 10 PM until the Vari Boost of
the following morning

• No Boost will take effect

• Day Cutoff and Set Point are maintained from 6 AM until

before 10 PM

• No Early Shutdown will take effect

• Night Cutoff and Set Point less Setback are maintained

from 10 PM until before 6 AM of the following morning

Friday

• Vari-Boost begins before 7 AM and ends at 7 AM

♦

• Day Cutoff, Day Heat Adjustment, and Day Space

Target are maintained from 7 AM until before 11 AM

• Night Cutoff, Night Heat Adjustment, and Night Space

Target are maintained from 11 AM until before 1 PM

• Day Cutoff, Day Heat Adjustment, and Day Space

Target are maintained from 1 PM until before 4 PM

• Night Cutoff, Night Heat Adjustment, and Night Space

Target are maintained from 4 PM until before 6 PM

• Day Cutoff, Day Heat Adjustment, and Day Space

Target are maintained from 6 PM until before 10 PM

• Early Shutdown starts before 10 PM and ends at 10 PM

• Night Cutoff, Night Heat Adjustment, and Night Space

Target are maintained from 10 PM until before 8 AM of
the following morning

• No Boost will take effect

• Day Cutoff and Set Point are maintained from 7 AM until

before 11 AM

• Night Cutoff and Set Point less Setback are maintained

from 11 AM until before 1 PM

• Day Cutoff and Set Point are maintained from 1 PM until

before 4 PM

• Night Cutoff and Set Point less Setback are maintained

from 4 PM until before 6 PM

• Day Cutoff and Set Point are maintained from 6 PM until

before 10 PM

• No Early Shutdown will take effect

• Night Cutoff and Set Point less Setback are maintained

from 10 PM until before 8 AM of the following morning

Содержание MPCQ Platinum









































Результаты поиска

Содержание MPCQ Platinum

Отзывы:

Бренды по названию

Популярные бренды

heat-timer MPCQ Platinum, Инструкции по установке и эксплуатации для

Результаты поиска

Содержание MPCQ Platinum

Отзывы:

Бренды по названию

Популярные бренды