®
Heat
Link
3
www.heatlink.com
TMP040 / TMP070 – 3-Way Mixing Panels
Installation, Operation, and Maintenance
Warnings
The zone control panel is for indoor use only and must be installed by a qualified installer/service technician. This product
must be installed and operated in strict accordance with the terms set out in this manual and in accordance with the relevant
requirements of the Local Authority Having Jurisdiction. Failure to comply will result in a void of warranty, and may also result
in property damage, serious injury, or death.
Servicing
Prior to commencing installation of this panel it is necessary to read and understand all sections of this manual. The symbols
below are used throughout this document to ensure proper operation of the panel, and your safety. Please pay attention to
these symbols.
Disclaimer
HeatLink Group Inc. shall not be responsible for errors in its brochures or printed materials. HeatLink Group Inc. reserves the
right to alter its products at any time without notice, provided that alterations to products already on order shall not require
material changes in specifications previously agreed upon HeatLink Group Inc. and the Purchaser. All trademarks in this
material are property of the respective companies. HeatLink and the HeatLink logotype are trademarks of HeatLink Group
Inc. All rights reserved.
Tools For Installation
• Level
• Screwdriver or power drill
• Flat head bit
• Phillips head bit # 2
• 2 adjustable wrenches (or 2
×
30mm wrenches)
In order to avoid injury or death, switch off the power to the panel prior to
inspecting or making connections to the terminal strip.
Warning
Possible Hazard
Warning
Live Power
Warning
Hot Pipes
Warning
Treated Water
