manualshive.com logo in svg

HEAT GLO COSMO-I30-IFT, Руководство по установке, Страница: 45 / 45

Поделиться
Скачать
HEAT GLO COSMO-I30-IFT Скачать руководство пользователя страница 45

45

Heat & Glo  •  COSMO-I30-IFT, COSMO-I35-IFT Installation Manual  •  2535-980 Rev. S  •  12/21 

Printed in U.S.A. -  Copyright 2021

Heat & Glo, a brand of Hearth & Home Technologies

7571 215

th

 Street West, Lakeville, MN 55044

www.heatnglo.com

Please contact your Heat & Glo dealer with any questions or concerns. 

For the location of your nearest Heat & Glo dealer, 

please visit www.heatnglo.com.

Remote Controls, Wall Controls and Wall
Switches

Follow the instructions supplied with the control installed 

to operate your fireplace:

For safety:

•  Install a switch lock or a wall/remote control with child 

protection lockout feature.

•  Keep remote controls out of reach of children.
See your dealer if you have questions.

B. Accessories

Install approved accessories per instructions included 

with accessories. Contact your dealer for a list of ap-

proved accessories.

WARNING! Risk of Fire and Electric Shock! 

Use ONLY 

Hearth & Home Technologies-approved optional acces-

sories with this appliance. Using non-listed accessories 

could result in a safety hazard and will void the warranty. 

Fan

Fan is factory installed.  No additional set up is required.

 

Magic Glass Refractory Panels

Glass panels ship standard with this appliance.  See 

Section 9.E for details. 

Optional Logs

If desired, a log set may be added.  Contact your dealer 

to order the correct log set. Follow instructions supplied 

with the log set to install your logs.  See your dealer if you 

have questions.

Содержание COSMO-I30-IFT














































Отзывы:

Нет отзывов