Heat Design FW5C, Инструкция по установке и эксплуатации

Страница: 3 / 14

2
HD02 01/10/11
1. List of Components
2. Component Identification and Assembly
Your Firewarm Cassette Stove comes packed in a cardboard box. Carefully remove any straps and
remove all cardboard and any plastic packaging, open the door and remove all the contents. See List
of Components section and check contents carefully.
2.1 To remove the baffle plate, carefully lift the hooks at the front up and over the pegs and slide the baffle
down and remove through the front door. Then remove the two side firebricks and the two rear
firebricks. Handle & store very carefully to one side where they will not get broken.
2.2 Now lift up the grate and carefully remove this from the stove.
2.3 Now proceed to install the stove according to these instructions and current installation standards or
HETAS advice. The internal parts of the stove can be re-assembled as the reverse of the previous
removal instructions.
Fig 2 – FW5C Stove Assembly and controls
Description of Parts Qty
FW5C Stove Assembly 1
Tool 1
Ash Pan 1
Flue Collar 1
Flue Collar fixing screws 4
Stove Operating Glove 1
Touch up paint 1
Warranty Card 1
Fig 1 – Stove Tool