Heat Controller VMH 30 SD Series, Руководство пользователя, Страница: 7 / 16

Owner’s Manual - VMH 30/36 SD Series
5
7
OPERATING INSTRUCTIONS
NOTE: This manual does not include Remote Controller Operations, see the
<<Remote Controller Instruction>> packed with the unit for details.
AUTO/COOL
Suspension bars
AUTO/COOL
1
2
Operating temperature
Manual switch
Manual switch
Mode
Temperature
Room temperature
Outdoor temperature
1. Optimum performance will be achieved within these operating temperatures. If air
conditioner is used outside of the above conditions, certain safety protection features
might come into operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high(over
80%) , condensed water may drip out of the unit. Please set the vertical air flow louver to
its maximum angle (vertically to the floor), and set HIGH fan mode.
Suggestion: Single this unit uses an Electric Heater, when the outside ambient
temperature is below (32°F) 0 ° C, we strongly recommend you to keep the machine plugged
in order to guarantee it running smoothly.
NOTE:
Cooling operation Heating operation Drying operation
temperature cooling system
Open and lift the front panel up to an angle
where it remains fixed with a clicking sound .
One press of the manual control switch will
lead to the forced AUTO operation. P ress the
switch twice within five seconds, the unit will
operate under forced COOL operation.
Close the panel firmly to its original position.
CAUTION:
This switch is used for testing purposes only.
To restore the remote controller operation,
use the remote controller directly.
1
3
2
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
62°F~90°F
( 17 °C ~32 O °C)
Manual operation
Units are equipped with a switch to run emergency operation mode. It can be accessed by
opening the front panel. This switch is used for manual operation in case the remote controller
fails to work or maintenance is necessary.
USER'S MANUAL - VMH 30/36 SD Series
50°F~90°F
(10°C~32°C)
32°F~86°F
(0°C~30°C)
5°F~86°F
(-15°C~30°C)
32°F~122°F
(0°C~50°C)
32°F~ 122 °F (0°C~ 5 0°C)
5 °F~ 122 °F ( -15 °C~ 5 0°C)