Heat Controller VMH 30 SD Series, Руководство пользователя, Страница: 13 / 16

Owner’s Manual - VMH 30/36 SD Series
13
TROUBLESHOOTING TIPS
7. The air conditioner runs function after turning off the unit.
When turning off the unit under COOL(AUTO COOL, FORCED COOL) and DRY mode, the air
conditioner will run function for 7-10 minutes,
then stop the operation and turn
off the unit automatically.
Anti-mildew
Anti-mildew
if turns off on HEAT mode, the unit will
continue operating for about 30 seconds at LOW fan speed,
Under Anti-mildew operation, do not restart the air conditioner until the
unit is completely off.
8. Dripping water may generate on the surface of the indoor unit when cooling in a high
relative humidity (relative humidity higher than 80%). Adjust the horizontal louver to
the maximum air outlet position and select HIGH fan speed.
9. Heating mode (For cooling and heating models only)
The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit
during heating operation. When the outdoor temperature falls, heat drawn in by the air
conditioner decreases accordingly. At the same time, heat loading of the air conditioner
increases due to larger difference between indoor and outdoor temperature. If a
comfortable temperature can't be achieved by the air conditioner, we suggest you use a
supplementary heating device.
10. Auto-restart function
Power failure during operation will stop the unit completely.
For the unit without Auto-restart feature, when the power restores, the OPERATION indicator
on the indoor unit starts flashing. To restart the operation, push the ON/OFF button on the
remote controller. For the unit with Auto-restart feature, when the power restores, the unit
restarts automatically with all the previous settings preserved by the memory function.
11.
Clean filter remind er function (Optional)
USER'S MANUAL - VMH 30/36 SD Series
After 24 hours of operation, the indoor display window will display and flash 'CL', this feature
is a reminder to clean the Air Filter for more efficient operation. After 15 seconds, the system
will revert back to the previous display again. When the 'CL' indicator appears and flashes,
please press the LED button on remote controller for 4 times or press the Manual control
button for 3 or more times to clear the registered hours, otherwise the "CL' indicator will
display and flash again for another 15 seconds at the next time of starting the unit.
11