Heat Controller SMA24SC, Руководство пользователя

Страница: 5 / 10

Heat Controller, Inc.
Remote ContRolleR
Owner’s Manual
4
If you do not use the remote controller for an extended
period of time, remove the batteries. Otherwise battery
leakage may damage the remote controller.
1. Install/Replace Batteries
A.
B.
•
•
•
•
2. Automatic operation
A.
B.
C.
D.
•
•
Replace the batteries when there is no beep from the indoor unit of if the Transmission
Indicator light fails to appear when buttons are pressed on the remote controller.
When the air conditioner is ready for use, switch on the power, the
OPERATION indicator lamp on the display panel of the indoor unit
starts flashing.
Push the ON/OFF button again to stop the unit’s auto operation.
In the AUTO mode, the air conditioner can logically choose COOL, FAN, HEAT
and DRY modes by sensing the difference between the actual ambient room
temperature and the set temperature on the remote controller.
If AUTO mode is not desirable, the desired mode can be selected manually.
operation Instructions