Heat Controller RPHE-093G Series, Руководство по установке и эксплуатации

Страница: 20 / 26

Packaged Thru-The-Wall Heat Pump
OWNER’S MANUAL
Heat Controller, Inc.
……………………………………………………………………………………………………………
17
3. USE AND MAINTENANCE
3.12 On board control function
1) Running LED: When lit indicates that the compressor is running
2) On/Off button: Turns the unit on/off
3) Mode button: Allows you to select the desired mode
– heating/cooling/dry/auto
4) Cooling LED: When lit indicates the unit is running cooling mode
5) Heating LED: When lit indicates the unit is running heating mode
6) Super Heating Mode button: Switches ON/OFF Super Heating Mode
7) Super Heating Mode LED: When lit indicates the Super Heating Mode is ON or OFF.
8) Down button: Reduces the set temperature.
9) Up button: Increases the set temperature.
10) Fan speed button: Selects the desired fan speed
– low/medium/high/auto.
11) Auto fan speed LED: When lit indicates the auto fan speed mode is active.
12) Low fan speed LED: When lit indicates the low fan speed mode is active.
13) Medium fan speed LED: Indicates the medium fan speed mode is active.
14) High fan speed LED: Indicates the high fan speed mode is active.
15) Temperature display window: The window will show both the set temperature and room
temperature. Whenever a temperature is set, it will flash on the display 15 times while flashing.
Following that, room temperature will be shown on the display for 70 seconds and finally, the display
will turn off.