Includes one fully featured
wireless remote per indoor unit.
‘V’ Series
Our InverterFlex multi-zone units let you
condition two, three or four rooms—or one
large space—with just one outdoor unit. The
contractor can design a system that best meets
the load requirements of each room being
conditioned because indoor air handlers can be
mixed and matched.
A single outdoor condenser is sized for multiple
indoor air handlers. These 9,000 and 12,000
BTUH indoor units can be mixed, up to the
point that their combined capacity reaches the
total system capacity—see the chart on the
following page.
InverterFlex models incorporate all the advantages
of inverter technology. The compressor speed is
variable, depending on the load demand. Most
of the time the unit runs at low RPMs, saving
energy while maintaining comfort, but ramping
up to higher RPMs when needed. Temperature
fl uctuations and compressor on/off cycling are
eliminated, and indoor air quality is enhanced
because air is constantly being pulled through
the fi lters and dehumidifi ed.
Tr u e z o n e c o n t r o l i s p o s s i b l e
because each air handler operates
independently. InverterFlex systems
are also great for larger spaces such
as fellowship halls and commons
areas: install one or more units for
quiet, effi cient, easily controlled
comfort.
InverterFlex
™
Systems
Dual Zone 18,000 to 24,000 BTUH
Tri/Quad-Zone 27,000
to 36,000 BTUH
Cool and heat two rooms or separate areas. Includes two indoor
air handlers and two wireless remotes, one for each air handler.
nit.
s i b l e
ates
ems
ch
s
14
Dual Zone 18
,0
00 to 24,00
Co
ol a
d
nd
h
ea
t tw
o room
s
or
s
ep
arat
TM
Features
n
Zone Control
—Each air handler is independently
controlled, can be set for individual preferences or
turned off when the room isn’t being used
n
Random Swing
—Continually adjusts air direction for
a gentle, breeze-like effect preferred by most people
n
Multiple Modes
—Cooling, dehumidifi cation only,
air circulation, heating plus:
•
Sleep
mode
•
24-hour
timer
•
Turbo
mode
n
Low Ambient Operation
—cooling 5° – 122° F,
heating 5° – 93.2 ° F
n
Auto Operation
—Automatically selects the mode
required to maintain a constant temperature/
humidity level
n
Multi-Stage Filtration
—Includes ionizer to
remove microscope particles, active carbon
and dust fi lter, and freshening fi lter for
improved indoor air quality
n
Auto Restart
—Reverts to the last setting
following a power failure
Cool and heat three or four rooms/separate areas.
Includes three or four air handlers and one wireless
remote for each air handler.
